The exterior of your house is the first impression people have of you and your home. The exterior needs to be in perfect condition to make sure that you make a stellar first impression. Often when you see patchy paint or paint starting to fade or chip, it can be a sign of poor quality work or a long overdue paint job. Either way, you must repaint your house and address all the issues causing exterior painting problems. Doing so will ensure you get a good quality paint job that will last a long time.
Problem: Exterior Paint Peeling Prematurely
Cause: If your exterior paint is peeling right down to the bare timber or bricks of your building, then the culprit might be moisture that is trapped in the wall. In most cases, these houses will have ventilation problems or dampness issues. These issues likely stem from leaks, worn-out sealants, unsealed joints and more. Before any form of repainting is done, these issues need to be addressed to prevent the paint from peeling.
If you spot premature bubbling, peeling or even blistering, it could also mean that the walls were painted when the surface was damp or not prepared adequately.
Paint can also peel if the top coat is applied before the base layer is completely dried. You can easily identify this issue by seeing another layer of paint under the blister. It can also stem from using cheap quality paints or incompatible paints, such as putting acrylic paint on top of oil-based paint.
To avoid these issues in the future, ensure that you get your repainting done by good-quality professional painters.
Problem: Patchy Exterior Paint
Cause: Patchy paintwork or discolouration in certain areas can signify that the paint must have been applied on top of a damp or dirty surface. Dirty walls are a result of an accumulation of dirt and grime. Painting on top of it can compromise paint adhesion. Therefore, a cardinal rule during exterior painting is to clean the wall before painting thoroughly. Even after it has been cleaned, the surface should be given ample time to dry fully. Patchy paintwork can also result from applying only one coat instead of two. If you stick with one layer of paint, you risk the old paint showing through, giving off an irregular, patchy look.
Problem: Paint Drips And Runs
Cause: If you see drip marks on your wall, it typically indicates that the paint applied to the wall was too heavy or the brush was over-saturated with paint. Other reasons for the paint drip are if it is too watery or if it was applied to an unprimed, high-gloss surface.
Problem: Paint Colour Fading And Lossing Gloss
Cause: If your paint appears to be fading or losing shine, it usually indicates that there was low-quality paint used. It is normal to see a certain degree of fading due to environmental factors such as exposure to the sun. However, if you witness the fading take place rapidly, it can be a sign to use paint that is more compatible with the weather you live in. To keep the brightness of your paint for a long time, you must use high-quality paint; you can even look at UV-resistant paints and more. Accumulation of dirt could also be another reason for your walls to appear dull; therefore, washing the exterior wall every 18 months is a wise choice.
Problem: Mould On New Exterior Paint
Cause: If your wall tends to be damp, there is a good chance you have mould on your walls or even on the surface of the paint and sealant. These walls tend to either be close to a water line or not receive proper sunlight. Even if you have a fresh coat of paint on your walls, mould will appear quickly if you do not remove the mould correctly. Even if the mould was cleaned off the walls, you must prepare the wall properly with products such as mould retardants to deter any new formation.
Problem: Rust Stain Appearing Through Paint
Cause: If you can spot rust strain on your new paint, the culprit is most likely non-galvanized iron nails that have begun to rust. Once the rust is formed, it can bleed through the top coat. Any professional painter will ensure that the nail heads are primed, filled and countersunk. Rust stains usually indicate a lack of primer or the wrong kind. Using the correct primer is important as it can correct the small flaws on the wall to give a good finish to your walls.
Solution: Work With Dyson Painter To Avoid Exterior Paint Issues
Proper Exterior painting adds immense value to your property; therefore, you need to pick the best professional painter in Hobart. Dyson Painters are Hobart’s choice for any painting-related task. With their experience in commercial and residential exterior painting projects such as the Taroona High School Project, the West Hobart Residential Painting Project, and multiple other works, all your requirements will be fulfilled by Dyson Painter. Rest easy knowing that you have the most passionate and dedicated professionals working efficiently within the stipulated time to provide best-in-class service. Contact us at firstname.lastname@example.org or 0417 580 981 to get in touch today!